Revo R4-8-16DVR3 - Manual (Page 44)

User’s Manual
38
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Panic
 Pre-Event  Event  Time.
The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event, Purple for Event,
and Blue for Time.
Selecting located at the bottom displays the Calendar Search screen.
Days with recorded video display on the calendar with white numbers. You can
select the days with recorded video by using the arrow buttons on the remote
control. Selecting the Display when entering Search Mode box will display
the Calendar Search screen whenever entering the Search mode.
Once you have
selected a day, pressing the button displays the first recorded image of the
selected date on the screen. Once you have selected the date you want to search,
review the surrounding video by using the playback controls located at the bottom.
Refer to the Recording Video – Playing Recorded Video section of this chapter
for information regarding playback controls.
Selecting located at the bottom displays the Search menu.
 Go To: Displays the first or last recorded image, or searches by date and time (see below for
more details).
 Backup: Copies a video segment and saves it (see below for more details).
 Zoom: Zooms the current playback image.
 Enable De-Interlace: Turns the de-interlace filter on. (4- and 8-ch models only)
 Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
NOTE: Playing video at low speed will be supported for video recorded 10 images or more
per second.
Selecting located at the bottom displays the Bookmarks screen (see below for more details). (16-ch model only)
Selecting in the top-left corner exits the Record Table Search screen.
Motion Search
Motion Search can be selected from the Search menu while
the DVR displays the camera full screen. The Motion Search
screen displays a list of motion events. Use the arrow buttons
to highlight the event for which you would like to see video
and press the
button to display the video associated with
the selected event in the small search screen.
Selecting Close and pressing the button will extract the
video associated with the Motion event and display the first
image of the event. Pressing the
(Play/Pause) button on
the remote control button will start playing the “event” video
segment. If you want to return to live monitoring, press the
MENU
button on the remote control and select the (Exit)
icon at the top of the screen.
You also can narrow your event search by selecting Option… and setting up new search conditions.
 From: Pressing the button toggles between On and Off. When
set to Off, you can enter a specific Date and Time. When set to On,
the search will be from the first recorded image. When highlighting
and pressing the button the bookmark list displays and the
bookmark point you selected will be the starting date and time (16-ch
model only).