Revo R4-8-16DVR3 - Manual (Page 28)

User’s Manual
22
Panic Record Settings (RECORD
 Panic Record Tab)
 Use Panic Recording: Check the box when using the
Panic recoding function.
 Panic Recording Duration: Set the duration of panic
recording. Panic recording will stop automatically after the
preset duration as long as the PANIC button on the remote
control is not pressed to stop the panic recording.
 Panic Recording ips: Set the images per second for Panic
recording.
 Panic Recording Quality: Set the recorded image quality
for Panic recording.
 Panic Recording Resolution: Set the recorded image
resolution for Panic recording.
Schedule Settings (RECORD
 Schedule Tab)
The DVR provides two recording schedule modes: Basic and Advanced. The Basic schedule mode allows you to set
recording settings for all camera channels at one time. The Advanced schedule mode allows you to set recording settings
for each camera channel.
Setting up the Basic Schedule Mode…
 Schedule Type: Select the Basic schedule mode.
 Record Schedule: Select the time range that the scheduled
recording will take place.
 Mode: Select the desired recording mode. ( : Time (Time-
lapse) recording, yellow : Pre-Event recording, red :
Post-Event recording, & red : Time & Post-Event
recording, yellow & red : Pre-Event recording & Post-
Event recording)
 ips: Set the images per second for the selected recoding
mode.
 Quality: Set the recorded image quality for the selected
recoding mode.
 Resolution: Set the recorded image resolution for the selected recoding mode. (16-ch model only)
 Dwell: Set the length of time you would like to record for the selected recoding mode.
Setting up the Advanced Schedule Mode…
 Schedule Type: Select the Advanced schedule mode.