NSi Industries K801Z User Manual
Page 6
HOLIDAY DATES
15.
Do You Want to Set or Review Holiday Dates?
PRESS YES. If not, PRESS NO and proceed to Step #18. Enter holiday date (month and day). PRESS
ENTER.
16.
Add another Holiday?
Enter additional holidays up to a maximum of 40 dates — unit will arrange them chronologically.
17.
Do You Want to Set or Review Holiday Dates?
PRESS YES to review or add dates. PRESS NO to proceed.
SEASONS
18.
Do You Want to Set or Review Season Dates?
PRESS YES if seasons are required. If not, PRESS NO and proceed to Step #22. Enter season number
beginning with #1. (Refer to your schedule sheet).
PRESS ENTER.
19.
Enter Starting Date
PRESS MONTH/DAY. PRESS ENTER.
20.
Enter Ending Date
PRESS MONTH/DAY. PRESS ENTER.
21.
Do You Want to Set or Review Season Dates?
PRESS YES to enter additional season numbers up to a maximum number of 8. PRESS NO to proceed.
22.
Do You Want to Enter Options Mode?
PRESS YES. (If NO is pressed, unit will skip all remaining options/steps and return to RUN mode).
NOTES:
Seasons must have a beginning month/day and an ending month/day.
If a season date is programmed and no schedule is entered for it, all loads will remain OFF during that season.
IF A SEASON’S START DATE IS LATER IN THE YEAR THAN ITS END DATE, IT WILL CROSS THE YEAR
BOUNDARY.
OPTION MODE FEATURES
In the OPTIONS MODE, you will have the following features:
Duty Cycles
Remote Timed Overrides
Astronomic Function
Load Outputs (Signal Timer)
Standard and Daylight Savings Options
AM/PM or Military Time Format
Clear All Memory? If YES is pressed, Are You Sure? will be asked. If YES is pressed, you will delete your
entire schedule and must start over again.
DUTY CYCLE PATTERN
23.
Do You Want to Set or Review Duty Cycles?
PRESS YES if duty cycle patterns are required. If not, PRESS NO and proceed to Step #26. ENTER
Duty Cycle Number —
PRESS ENTER.
24.
Enter Minutes OFF/ON
PRESS MINUTES (1-99) OFF and 1-99 ON. Then PRESS ENTER.
25.
Do You Want to Set or Review Duty Cycles?
PRESS YES and enter next duty cycle number and pattern. Repeat for all other duty cycles up to a
maximum of 9. (Refer to your schedule sheet).
PRESS NO to proceed.
5