NSi Industries DG280A-24 - Manual (Page 11)

9
Example 1: The screen below shows a pattern with 3
active days and 2 skip days with today set as the first
day of skip (01 OFF) .
Example 2: For the DG280A with opposite
operations, screen below shows channel 2 set for a
cycle with 2 active days and 3 skip days with today
set as the first active day (01 ON) to be opposite the
first example .
Press MODE when Skip Days are complete .
Unit is in the AUTO (automatic) mode .
The word FLASH may appear to indicate a new
program has been written to memory .
Press the EVENT key once (or twice for two circuit
units) to activate current schedule then EVENT key
again to return to AUTO mode .