NSi Industries DG280A-24 - Manual (Page 10)

8
7.1 SETTING SKIP DAY MODE
Review the Skip Day carefully before
using this feature.
Call the Tork Tech Support line if you have
any question on set-up 888-500-4598.
Press MODE until display shows:
Press D/ON button to set the number of days load will
be active . The first number pair will change .
Press D/OFF button to set the number of days load will
skip . The second number pair will change .
Press DAY button to set today’s position within the
D/ON and D/OFF pattern . The third number pair will
change .