Martel Electronics DMC1410 - Manual (Page 40)

38
PRES_UNIT? Returns the pressure unit for the upper and lower display
PULSE_CNT Sets the number of pulses for the pulse train
PULSE_CNT? Returns the number of pulses in the pulse train
REMOTE Puts the calibrator in remote mode
RTD_TYPE Sets the RTD type
RTD_TYPE? Returns the RTD type
RTD_WIRE Sets the number of wires used by the RTD mode.
RTD_WIRE? Returns the wire number setting used in the RTD mode
SET_CLOCK Set calibrator clock
SIM Sets the output for mA simulation
SIM? Returns the output of the mA simulation
TAG_CLEAR Clear test data for a specified tag
TAG_CLEAR_ALL Clear test data for all tags
TAG_DNLD
Download tag calibration test configuration data from a PC
to the calibrator
TAG_UPLD Upload tag calibration test results to a PC from the calibra-
tor
TAGS? Upload a list of all tag iD's to PC
TC_TYPE Sets the thermocouple type
TC_TYPE? Returns the thermocouple type
TEMP_UNIT Sets input/output temperature unit for RTD and TC
TEMP_UNIT? Returns the temperature unit for RTD and TC
TRIG Starts and stops the pulse train in pulse mode
TRIG? Returns TRIGGERED when a pulse train is on. Returns
UNTRIGGERED when the pulse train is off.
TSENS_TYPE Sets temperature sensor type.
TSENS_TYPE? Returns temperature sensor type
UPPER_MEAS Sets the measuring mode for the upper display.
U_PRES_UNIT Sets the upper pressure unit
VAL? Returns the measured values
ZERO_MEAS Zeros the pressure module
ZERO_MEAS? Returns the zero offset of the pressure module