KYORITSU 6010B - Manual (Page 31)

― 29 ―
9.3 Delete the stored data
Stored data can be deleted according to following sequence.
(1) Press to enter into MEMORY MODE (" " appears on LCD).
NORMAL MODE MEMORY MODE
(2) Press to recall.
(3) Press or and select
Data No.
("ALL" ←
→ 000 - 299 ← → "ALL")
(4) Press .
"clr" is displayed and blinking
(5) Press , the data is deleted with beep.
Press , the data is not deleted.
After either operation, returns to Data No.
Note: By pressing MEMORY MODE SWITCH during an operation, can
also undo the last action or release MEMORY MODE.
Measurement cannot be performed when Test button is pressed in
MEMORY MODE.
Select "ALL" at STEP(3) to delete all stored data.
Undo
or
Delete Not delete