KYORITSU 2009R - Manual (Page 15)

̶ 13 ̶
⑧Terminal Cover
Slides over V/Ω and COM Terminals to prevent access to them
when OUTPUT terminal is in use.
⑨OUTPUT Terminal(For AC or DC current range only)
Provides DC voltage output in proportion to the AC or DC current
reading. The output is connected to a recording device such as a
chart recorder for long hour monitoring. No output is available on
voltage and resistance ranges.
⑩COM Terminal
Accepts the black test lead for voltage or resistance measurement.
⑪V/Ω Terminal
Accepts the red test lead for voltage or resistance measurement.
⑫Safety Hand Strap
Prevents the instrument from slipping off the hand during use.
⑬ Test Leads (Model 7107)
Connected to COM and V/Ω terminals for voltage or resistance
measurement.
⑭Output Plug(Model 8201)
Plugs into the OUTPUT terminal for connection to a recording
device.
(See section 7 ー 4, OUTPUT Terminal.)
⑮Barrier
It is a part providing protection against electrical shock and
ensuring the minimum required air and creepage distances.