KROHNE OPTIWAVE 8300C Marine ATEX EN - Manual (Page 7)

INSTALLATION
2
7
OPTIWAVE 8300 C
www.krohne.com 02/2009 - 4000407102 - AD ATEX OPTIWAVE 8300 R02 en
Installation
2.1 Precautions
2.1.1 General notes
2.1.2 Electrostatic discharge
Take the necessary antistatic precautions if you:
• handle,
• install or
• use
the device in potentially explosive atmospheres. Do not install in a location (near to ventilation
systems, for example) where the electrostatic charge can increase.
WARNING!
When you install the device, obey the conditions in the EC-Type Examination certificate. These
conditions include:
•
The special conditions for safe use.
• The Essential Health and Safety Requirements.
DANGER!
This installation must agree with EN 60079-14: Electrical installations in hazardous areas.
DANGER!
Risk of electrostatic discharge from the blue plastic sun cover, the Drop antenna and the flange
plate protection (if the Drop antenna has this option). Make sure that all personnel and
equipment are correctly grounded.
Figure 2-1: ESD warning sticker (below the device nameplate)
1 Text: Plastic Parts
2 Text: Warning! Potential electrostatic hazard - see instructions
AD_ATEX_OPTIWAVE8300_EN_090407_4000407102_R02_PRT.book Page 7 Tuesday, April 7, 2009 5:07 PM