KROHNE OPTIMASS 1000 EN - Manual (Page 31)

TECHNICAL DATA
6
31
OPTIMASS 1000
www.krohne.com 04/2011 - 4000977901 - MA OPTIMASS 1000 R01 en
Temperature Temperature Temperature Temperature
Accuracy ± 1°C / 1.8°F
Operating conditions
Maximum flow rates Maximum flow rates Maximum flow rates Maximum flow rates
S15 6500 kg/h / 240 lbs/min
S25 27000 kg/h / 990 lbs/min
S40 80000 kg/h / 2935 lbs/min
S50 170000 kg/h / 6235 lbs/min
Ambient temperature Ambient temperature Ambient temperature Ambient temperature
Compact version with Aluminium
converter
-40...+60°C / -40…+140°F
Extended temperature range: +65°C / +149°F for some I/O options. For more
information contact manufacturer.
Compact version with Stainless Steel
converter
-40...+55°C / -40…+130°F
Remote versions -40...+65°C / -40…+149°F
Process temperature Process temperature Process temperature Process temperature
Flanged connection -40…+130°C / -40…+266°F
Hygienic connection -40…+130°C / -40…+266°F
Nominal pressure at 20 Nominal pressure at 20 Nominal pressure at 20 Nominal pressure at 20°C / 68 C / 68 C / 68 C / 68°F F F F
Measuring tube Measuring tube Measuring tube Measuring tube
Stainless Steel -1…100 barg / -14.5…1450 psig
Outer cylinder Outer cylinder Outer cylinder Outer cylinder
Non PED / CRN approved Typical burst pressure > 100 barg / 1450 psig at 20°C
PED / CRN approved secondary
containment
-1…63 barg / -14.5…910 psig
PED approved secondary containment -1…100 barg / -14.5…1450 psig
Fluid properties Fluid properties Fluid properties Fluid properties
Permissible physical condition Liquids, gases, slurries
Permissible gas content (volume) Contact manufacturer for information
Permissible solid content (volume) Contact manufacturer for information
Protection category (acc. to EN 60529) IP 67, NEMA 4X
Installation conditions
Inlet runs None required
Outlet runs None required
Materials
Measuring tube Stainless Steel UNS S31803 (1.4462)
Spigot Stainless Steel 316 / 316L (CF3M / 1.4409) dual certified
Flanges Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Outer cylinder Stainless Steel 304 / 304L (1.4301 / 1.4307) dual certified
Optional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Heating jacket version Heating jacket version Heating jacket version Heating jacket version
Heating jacket Stainless Steel 316L (1.4404)
The outer cylinder is in contact with the heating medium
MA_OPTIMASS_1000_en_110401_4000977901_R01.book Page 31 Friday, April 1, 2011 1:41 PM