KROHNE OPTIFLUX 1000 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTIFLUX 1000
www.krohne.com 04/2014 - 4000846303 - HB OPTIFLUX 1000 R03 en
1.1 Intended use
The electromagnetic flowmeter is designed exclusively to measure the flow of electrically
conductive, liquid media.
1.2 Certification
The device fulfils the statutory requirements of the following EC directives:
• EMC Directive 2004/108/EC in conjunction with EN 61326-1: 2006
• Low Voltage Directive 2006/95/EC in conjunction with EN 61010-1: 2010
• Pressure Equipment Directive 97/23/EC
The manufacturer certifies successful testing of the product by applying the CE marking.
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
WARNING!
If the device is not used according to the operating conditions (refer to chapter Technical data),
the intended protection could be affected.
CE marking