KROHNE OPTIWAVE Hart - Manual (Page 31)

User Guide for Optiwave (FMCW) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France) Page 31 of 34
3.9 Process Variable
The Process Variables are displayed with magnitude and its corresponding unit along with upper & lower
limits. Four process variables are active on a single screen depending on the Output function setting.
Primary Output Function, Secondary Output Function, Tertiary Output Function, and Fourth Output Function
are used to set Primary Process Variable, Secondary Process Variable, Tertiary Process Variable, & Fourth
Process Variable respectively.
If “Level” is set as Primary Output Function, then “Level” is displayed as a Primary Process Variable &
respective current, percentage value for level is also displayed in below process variable face plate.