KROHNE OPTIWAVE Hart - Manual (Page 23)

User Guide for Optiwave (FMCW) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France) Page 23 of 34
3.8 Configuration Variables
To view Help for each configuration parameter, first click on Help button on toolbar & then click on
the parameter for which help is to be viewed.
3.8.1 Installation Parameters1
This plate consists of the editable parameters of the device like Tank Type, Tank Height etc. In this
plate some of the parameters are dependent on other parameters like Measuring Range, Tank Height,
etc is dependent on Tank Type, Stillwell Height, Stillwell Diameter depends upon the Application
Type which gets disabled.
On editing particular parameter it gets yellow in color and Apply button get
activated. On clicking, Apply Button the new value gets stored in the parameter.