KROHNE OPTIWAVE Hart - Manual (Page 12)

User Guide for Optiwave (FMCW) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France) Page 12 of 34
3.4.2 Output1 Upper
In Output1 Upper, user allows to trim current output1.
The user start to fix the current to 20mA, after entering the current value he read on a voltmeter,
this value is sent to the device. This method allows adjusting to have exactly the good current
value of output1 loop.