KROHNE MFC 300 Modbus - Manual (Page 6)

4
LOCAL CONFIGURATION
6
MFC 300
www.krohne.com 11/2009 - 4000744801 - AD Modbus MFC 300 R01 en
Local configuration
Converter Fct.
No. Display Description and settings
C6.8.1 Slave Address Selects the Modbus address of the device.
Range: 1..247 (default = 1)
C6.8.2 Baud Rate Selects the baud rate of the device.
Options:
1200 / 2400 / 3600 / 4800 / 9600 / 19200 (default) / 38400 / 57600 / 115200
C6.8.3 Parity Selects the parity.
Options:
Even (default) / Odd / No
C6.8.4 Data Format Selects the data format.
Options:
Big Endian (default) / Little Endian
C6.8.5 Transmission Delay Selects the delay between receiving the last byte of a request and
sending the first byte of the response.
Range: 0..40ms (default = 0ms)
C6.8.6 Stop Bits Selects the number of stop bits.
Options:
1 (default) / 2
C6.8.7 Information Displays information about the device.
.book Page 6 Tuesday, November 24, 2009 1:48 PM