KROHNE VARIFLUX 6000 EN - Manual (Page 6)

6 Installation instructions VARIFLUX 6000
3 Instrument nameplate
VARIFLUX 6000
separate flow sensor
Electrode materials
HB Hastelloy
B2
HC Hastelloy C4
PT Platinum
TA Tantalum
TI Titanium
V4A
Stainless steel 1.4571 / SS 316-Ti or
Stainless steel 1.4401 / SS 316L
Instrument nameplate for VARIFLUX 6000 compact flowmeters
see installation and operating instructions for the signal converter.
4 Versions
VARIFLUX 6000
Separate flow sensor electrically connected to the signal
converter by signal and field current cables.
VARIFLUX 6010 K Compact flowmeter (K), IFC 010 K or IFC 020 K signal converter mounted
VARIFLUX 6020 K direct on the flow sensor.
VARIFLUX 6080 K Compact flowmeter (K), IFC 090 K signal converter mounted direct
on the flow sensor.
Versions for hazardous locations
VARIFLUX 6000 and VARIFLUX 6080 K are approved as electrical equipment to the harmonized
European Standards and to Factory Mutual (FM).
Test certificate, certificate of conformity and wiring instructions for these devices are attached to
the “EEx” installation instructions, provided only with hazardous-duty equipment.
Please note: Flowmeters for use in hazardous locations (EEx) have different dimensions and
changed constructions.
Type designation Magnetic field frequency
(here 1/6 of power frequency)
Tag No.
Protection category
to IEC 529/EN 60529
Insulation class
of field coils
Series No.
Flow sensor
constant
Meter size
DN in mm and
inch equivalent
Liner
PFA
Electrode material
See Table
Flange pressure rating
or flange class
6000