Operation – KROHNE OPTISENS PH 8300 EN User Manual
Page 32
4
OPERATION
32
OPTISENS PH 8300
www.krohne.com
04/2012 - 4001926701 - MA OPTISENS PH 8300 R01 en
• Enter the measured temperature. Press ^ to confirm the entered value. The manually
measured temperature will now be used for temperature compensation.
• Step 2c: probe process input A
probe process input A
probe process input A
probe process input A
The temperature sensor connected to input A of the signal converter is used for temperature
compensation.
The temperature sensor probe process input A
probe process input A
probe process input A
probe process input A has to configured in submenu process input A
process input A
process input A
process input A.
If you use a Pt100/1000 follow the instruction in step 2.1. If you use manually entered value,
follow the instruction in step 2.2.
Step 2b: probe manual
probe manual
probe manual
probe manual
Measure the temperature of the measuring medium.
•
Press >>>> for more than 2.5 seconds, then release the button. You are on the main menu level. In the
upper line of the display "A" appears, beneath the main menu setup
setup
setup
setup is highlighted.
•
Press
or
until the main menu setup
setup
setup
setup is highlighted.
MAIN MENU
A quick setup
B test
> C setup
> C setup
> C setup
> C setup
D service
•
Press >>>> to enter the chosen menu.
You are on the first submenu level. In the upper line of the display "setup" and "c1" appears,
beneath the submenu process input A
process input A
process input A
process input A is highlighted. Choose process input A or B where ever
pH is configurated.
•
Press
or
to select process input A
process input A
process input A
process input A or process input B
process input B
process input B
process input B.
•
Press >>>> to enter the chosen menu process input A/B
process input A/B
process input A/B
process input A/B.
You are on the second submenu level. Press or until the submenu temperature
temperature
temperature
temperature is
highlighted.
•
Press >>>> to enter the chosen menu. The submenu probe
probe
probe
probe is highlighted.
•
Press
or
until the submenu manual
manual
manual
manual is highlighted.
•
Press ^ to enter the chosen menu
.book Page 32 Tuesday, July 3, 2012 2:56 PM