KROHNE OPTITEMP TT 60 C-R EN - Manual (Page 5)

11/2010 – 4000754401 – MA OPTITEMP TT60CR R01 en www.krohne.com 5
1.3 Certifications
Approval Demko 06 ATEX 141336X Approval Demko 06 ATEX 141336X Approval Demko 06 ATEX 141336X Approval Demko 06 ATEX 141336X
TT 60 C:
TT 60 C: TT 60 C: TT 60 C: CE CE CE CE II 3G EEx nL I II 3G EEx nL I II 3G EEx nL I II 3G EEx nL IIC IC IC IC
TT 60 C Ex: TT 60 C Ex: TT 60 C Ex: TT 60 C Ex: CE 0102 CE 0102 CE 0102 CE 0102 II 1G Ex ia IIC II 1G Ex ia IIC II 1G Ex ia IIC II 1G Ex ia IIC
IMPORTANT NOTE IMPORTANT NOTE IMPORTANT NOTE IMPORTANT NOTE!
See also the ATEX certificate "Special conditions for safe use".
The measuring device complies with the statutory requirements of the following EC directives:
The manufacturer's declaration can be viewed on the Internet at
http://www.krohne.com/html/dlc/index.shtml.
KROHNE Messtechnik GmbH certifies successful testing of the product by applying the CE
mark.
1.3.1 Certifications, PC connection cable, Type A
Approval Demko 06 ATEX 141337X
1.4 Manufacturer's safety instructions
The measuring device has been built and tested in accordance with the current state of the art,
and complies with the relevant safety standards.
However, dangers may arise from improper use or use for other than the intended purpose. For
this reason, observe all of the safety instructions in this document carefully.
1.4.1 Notes about the documentation
In addition to the safety rules and industrial safety regulations in this documentation, national
and regional safety rules and industrial safety regulations must also be observed.