KROHNE OPTITEMP TT 60 C-R EN - Manual (Page 10)

11/2010 – 4000754401 – MA OPTITEMP TT60CR R01 en www.krohne.com 10
3.2 TT 60 R installation
The TT 60 R transmitter is intended for installation on a top-hat rail according to DIN EN 50022.
AT AT AT ATTENTION! TENTION! TENTION! TENTION!
The TT 60 R may not be installed for measurements in areas with potentially explosive
atmospheres.
For measurements in areas with potentially explosive atmospheres, the TT 60 C must be
used.
Figure 2: TT 60 R rail installation
1 Hook the upper groove of the transmitter onto the rail.
2 Press the transmitter downwards until the snap fastener engages on the rail.
3
To remove, press the snap fastener downwards using a screwdriver. Carefully pull the
transmitter forwards.