KROHNE OPTITEMP TT 31 R EN - Manual (Page 17)

02/2011 – 4000753501 – MA OPTITEMP TT31CR R01 en www.krohne.com
17
2. With voltage supply
The transmitter is connected to the PC with ATEX cable type A and adapter type C. In
this case the transmitter must be connected to an external voltage supply.
Type A
Cable
Type C
Adapter
Figure 6: PC connection cable ATEX
Order number Comment
Type A (cable) VI70IPRX0002 ATEX certified
Type C
(adapter)
VI70IPRP0001 --
5.1.2 Connection, TT 31 R
If the transmitter is configured with the PC, a configuration cable and an adapter from
the configuration set (order number see Chapter 7.1) must be used as the connection
between the PC and the transmitter.
An ATEX certified cable must be used for transmitters bearing the symbol.
Type A
Cable
Type C
Adapter