KROHNE OPTITEMP TT 31 R EN - Manual (Page 11)

02/2011 – 4000753501 – MA OPTITEMP TT31CR R01 en www.krohne.com
11
4.2 Connections, measuring input
The input and output signals and the supply voltage must be connected in accordance
with the following illustrations. To avoid measuring errors, all cables must be connected
properly and the screws tightened correctly.
Figure 2: Installation diagram TT 31 R
1
Pt100, Pt1000, Ni100, Ni1000, 4 wire connection
2
Pt100, Pt1000, Ni100, Ni1000, 3 wire connection
3
Pt100, temperature difference T
1
>T
2
4
Potentiometer, 3 wire connection
5
Potentiometer, 4 wire connection
6
Thermocouple
7
Voltage