AT&T DECT CL84309 - Manual (Page 39)

33
Multiple handset use
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any
handsets.
To start the paging tone:
Press
INTERCOM
/HANDSET LOCATOR at the telephone base
to start the paging tone on all handsets for 60 seconds.
INTERCOM TO: appears on the screen for five seconds
before the paging tone is sent to all handsets.
NOTE: If you press OFF/CLEAR or MUTE/
DELETE
on a
handset, the ringer of the handset is off, but the page cycle
continues for the duration of the 60 seconds.
To stop the paging tone:
Press PHONE/
FLASH
, SPEAKER, or any dial pad
key (0-9, *, or #) on the handset(s),
–OR–
Press
INTERCOM
/HANDSET LOCATOR on the telephone base.
NOTE: The handset ringer volume also determines the volume of the
paging tone. If the handset ringer volume level is set to off, that handset is silent for all calls
and paging (page 14).
Join a call in progress
You can conference with another system handset or the telephone base while
on a call.
Using a cordless handset:
Press
PHONE/
FLASH
or SPEAKER on another cordless handset.
Press OFF/
CLEAR
or place the handset in the charger to hang up. The call
does not terminate until all handsets and the telephone base hang up.
Using the telephone base:
Lift the corded handset or press
SPEAKER on the telephone base.
Place the corded handset in the telephone base or press SPEAKER to hang
up. The call does not terminate until all handsets and the telephone base hang
up.
NOTE: You can use a maximum of four cordless system handsets and the telephone base at
the same time on an outside call.
•
•
•
**PAGING**
INTERCOM TO:
MSG #
- -