AT&T DECT CL84309 - Manual (Page 37)

31
Telephone operation
Options while on calls
Volume control
On a cordless handset:
While on a call, press
VOLUME-/q
CID
to decrease or press VOLUME+/
DIRp
to
increase the listening volume.
On the telephone base:
While on a call, press
VOLUME qp to increase or decrease the listening
volume.
NOTES:
1. Handset and speakerphone volume settings are independent.
2. When the volume reaches the minimum or maximum setting, you hear two beeps.
Call waiting
If you subscribe to call waiting service from your local telephone service
provider, you hear a beep if someone calls while you are already on a call.
Press
PHONE/
FLASH on the cordless handset or press FLASH on the
telephone base to put your current call on hold and answer the new call.
You can press
PHONE/
FLASH on the cordless handset or FLASH on the
telephone base at any time to switch back and forth between the calls.
Mute
Use the mute function to turn off the microphone. You can hear the caller, but
the caller does not hear you.
To mute the call on a cordless handset:
• Press
MUTE/
DELETE
to silence the microphone. When mute is
on, the handset screen shows MUTED for a few seconds and
the MUTE icon shows until mute is turned off.
To un-mute the call on a cordless handset:
• Press
MUTE/
DELETE
again and resume speaking. When mute is turned off,
MICROPHONE ON shows temporarily on the handset screen.
To mute the call on the telephone base:
• Press
MUTE to silence the microphone. When mute is
on, the screen on the telephone base shows MUTED
for a few seconds and the MUTE button turns red until
mute is turned off.
To un-mute the call on the telephone base:
• Press
MUTE again and resume speaking. When mute is turned off,
MICROPHONE ON shows temporarily on the screen of the telephone base.
PHONE 0:00:30
MUTED
MUTE
PHONE 0:00:30
MUTED
MSG #
- -