AT&T DECT CL84309 - Manual (Page 35)

29
Telephone operation
Telephone operation
Temporary ringer silencing
Press
OFF/
CLEAR
or MUTE/
DELETE
on a cordless handset, or press MUTE
on the telephone base when there is a call to silence the ringer temporarily
on that handset or the telephone base only. This turns off the ringer without
disconnecting the call. The next incoming call rings normally at the preset
volume.
NOTE: Each handset or the telephone base rings when there is an incoming call unless the
ringer volume is turned off on that handset or the telephone base.
Ending a call
Using a cordless handset:
Press
OFF/
CLEAR
or return the handset to the charger.
Using the telephone base:
Return the corded handset to the telephone base or press
SPEAKER if you
are using speakerphone.
Auto off
A call ends automatically when you put the handset in the charger.
(If the base speakerphone is active, placing the corded handset in the base
does not end the call.)
Clearspeak TM dial-in-base speakerphone
During a call, you can press SPEAKER on the telephone
base to alternate between hands-free speakerphone and
corded handset use.
Cordless handset speakerphone
During a call, press
SPEAKER on a cordless handset to switch
between hands-free speakerphone and normal handset use.
NOTE: If you use the speakerphone during LOW BATTERY mode, the
backlight on the handset screen and dial pad is off, except for the
SPEAKER button (see page 8 for information on LOW BATTERY mode
and battery charging.)
Clearspeak TM is a trademark of Advanced American Telephones.
SPEAKER 0:00:30
MSG #
- -
Elapsed time
Elapsed time
SPEAKER 0:00:30