KROHNE OPTISWIRL 4070 Quickstart EN - Manual (Page 5)

INSTALLATION
2
5
OPTISWIRL 4070
www.krohne.com 06/2010 - 4000122102 - QS OPTISWIRL R04 en
2.2 Transport
• Use lifting straps wrapped around both process connections for transport.
• Do not lift measuring devices by the signal converter housing for transport.
• Never lift the measuring device by the pressure sensor.
• Do not use lifting chains as they may damage the housing.
Figure 2-2: Transport instructions
CAUTION!
Non-secured devices can pose risk of injury. The centre of mass of the device is often higher
than the point at which the lifting straps are attached.
Prevent the measuring device from sliding or rotating accidentally.
QS_OPTISWIRL4070_R04_en_122102_PRT.book Page 5 Monday, June 7, 2010 8:51 AM