KROHNE VA 40-VA 45 EN - Manual (Page 22)

5
START-UP
22
VA40 - VA45
www.krohne.com 09/2013 - 4000424402 MA VA40 45 R04 en
Start-up
5.1 Standard device
CAUTION!
When starting up the device, the following points must be observed:
• Compare the actual operating pressure and the product temperature of the system with the
specifications on the nameplate (PS and TS). These specifications may not be exceeded.
• Make sure materials are compatible.
• Slowly open the shut-off valve.
• When measuring liquids, vent the pipes carefully.
• When measuring gases, increase pressure slowly.
• Avoid float impact (e.g. caused by solenoid valves), as this is likely to damage the measuring
unit or float.
MA_VA40_45_R04_en_424402_PRT.book Page 22 Monday, September 16, 2013 8:50 AM