KEPCO RKW 30W Series Operator Manual - Manual (Page 4)

4
228-1449 REV 5 082610
KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102
http://www.kepcopower.com email: [email protected]
V — OPERATION
When output voltage is available, the green LED is on.
The Output Voltage Adjust trimmer (see Figure 2) allows
adjustment of the output voltage within the range specified
in Table 1.
SERIES OPERATION: When a number of power sup-
plies are operating in series, the current rating is to be lim-
ited to the rating of the power supply with the lowest
rating. A diode (Vr>2 Vo, If>2Io, Vf<< low) must be con-
nected to the power supply output terminals to protect the
unit from reverse voltage.
FIGURE 2. COMPONENT LOCATIONS
FIGURE 3. POWER SUPPLY MOUNTING
Σ
30W
MODELS
OUTPUT VOLTAGE ADJUST TRIMMER
OUTPUT VOLTAGE ON INDICATOR
OUTPUT +
OUTPUT -
GROUND
LINE
NEUTRAL N
L
+
-