KEPCO RAB 39-40RKW6 - Manual (Page 2)

2
228-1278 REV 7 081406
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
FIGURE 1. MECHANICAL OUTLINE OF KEPCO MOUNTING BRACKET
MODEL RAB 39-40ERD, RAB 39-40FAW, RAB 39-40RCW, RAB 39-40RKW6 AND RAB 40-RKE
TABLE 2. MOUNTING POWER SUPPLY TO BRACKET
POWER SUPPLY
SERIES
MODELS
USE HOLES
(see Figure 1)
HARDWARE
(Mount power supply to bracket)
KEPCO P/N
FAW
50 Watts A1, A2
(2) Machine Screws (4-40 x 5/16)
(2) Int. Lock Washers (#4) 101-0092
103-0014
100 Watts
A3 through A6
(4) Machine Screws (4-40 x 5/16)
(4) Int. Lock Washers (#4) 101-0092
103-0014
150 Watts
ERD
30 Watts B1 through B4 (4) Machine Screws (8-32 x 5/16)
(4) Int. Lock Washers (#8) 101-0283
103-0017
60 Watts B3 through B6
150 Watts B3, B4, B7, B8
RCW
350 Watts C1 through C4 (4) Machine Screws (M4 x 12)
(4) Split Lock Washer #8
(4) Flatwasher #8 501-0040
103-0032
103-0078
750 Watts* C1, C2, C5, C6
RKE 1500W B9 through B12
(4) Machine Screws (M4 x 8) (with inte-
gral lockwasher)
501-0035
RKW
30 Watt A10, C7 (2) Machine Screws (M3 x 8) (with inte-
gral lockwasher)
501-0041
50 Watts B9, C7
100 Watts C7, C8
(2) Machine Screws (M4 x 8) (with inte-
gral lockwasher)
501-0035
150 Watts C9 through C12 (4) Machine Screws (M4 x 8) (with inte-
gral lockwasher)
501-0035
600 Watts B9 through B12
* CAUTION: ALL SPECIFIED HARDWARE MUST BE USED WHEN MOUNTING THE RCW 750 WATT POWER SUPPLY. FAILURE
TO USE ALL HARDWARE WILL CAUSE SCREW PENETRATION INTO UNIT TO EXCEED ALLOWABLE LIMITS AND
WILL RESULT IN DAMAGE TO THE UNIT.