KEPCO Kit 219-0442, Chassis Slides Kit - 24 in. deep cabinet (for RA 60) - Manual

©2003, KEPCO, INC 1
Data subject to change without notice 228-1471
I N S T R U C T I O N M A N U A L
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
KIT
219-0442
CHASSIS SLIDES KIT NO. 219-0442
1. DESCRIPTION
This Kepco KIT contains the components required to install chassis slides on Kepco RA 58 or RA 60 Rack Adapters to
accomodate 22- to 26-inch deep cabinets.
2. INSTALLATION OF CHASSIS SLIDES
2.1 MATERIAL REQUIRED (SEE TABLE 1.)
2.2 PROCEDURE (SEE FIGURES 1, 2 AND 3.)
1. Attach two chassis sections of slide (108-0318) to each side of rack adapter using eight screws (101-0311)
(see Figure 1).
FIGURE 1. INSTALLING CHASSIS SLIDES ON RACK ADAPTER
TABLE 1. MATERIAL REQUIRED
MATERIAL LOCATION QUANTITY
Slide (includes cabinet and chassis sections), Kepco P/N 108-0318 (Jonathan P/N
110QD-18-1)
Provided in this Kit 2
End Bracket, Kepco P/N 128-1849 (Jonathan P/N SPO-440-Z) Provided in this Kit 2
End Bracket, Extended, Kepco P/N 128-1699 (Jonathan P/N 204161 RETMA) Provided in this kit 2
Screw 10-32 x 3/8 in. long, BHPH, cadmium/yellow plated Kepco P/N 101-0311 Provided in this Kit 16
Nut, 10-32 Kepco P/N 102-0008 Provided in this Kit 8
Washer, flat #10 Kepco P/N 103-0031 Provided in this Kit 8
Washer, Internal lock, #10, Kepco P/N 103-0019 Provided in this Kit 8
( 1 ) 108-0318 JONATHAN SLIDE 110-18-QD-1
SLIDE CHASSIS SECTION ONLY