KEPCO KIT 219-0444, Kit for connecting three 1000W BOPs in Series - Manual (Page 2)

KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000
FAX (718) 767-1102 email: [email protected]
2
228-1525 REV 3 033012
TABLE 2. EQUIPMENT SUPPLIED
Item Quantity Purpose Kepco P/N
Output Power cable
(1.5 ft.)
2
Connects the OUTPUT terminal of Master to the COMMON terminal of Slave #1 and
the OUTPUT terminal of Slave #1 to the COMMON terminal of Slave #2.
118-1112
Digital Control (Bitbus)
Cable (3 ft)
1
Provides communication between master and two slaves.
118-1148
Protection Cable
(1 ft.)
2
Provides interlock protection signals required for multiple unit operation.
118-1126
Series Control cable
(1.5 ft.)
2
Provides control signals required for series operation.
118-1120
Protection - OUT Termi-
nation (Slave)
1
Provides proper termination for the slave connection to the Protection Cable.
195-0108
Protection - IN Termina-
tion (Master)
1
Provides proper termination for the master connection to the Protection Cable.
195-0107
Chassis Ground Cable 2 Connects chassis ground terminals of all units. 118-1272
Ground Cable mounting
hardware 3 sets Each set consists of eight parts, mounted in the following order: No. 10 star lock-
washer P/N 103-0106 (at chassis), No. 10 flat washer P/N 103-0031, No. 10 split
lockwasher P/N 103-0033, 10-32X3/8 nut P/N 102-0008, No. 10 flat washer P/N 103-
0031, [lug(s) from ground cable], No. 10 flat washer P/N 103-0031, No. 10 split lock-
washer P/N 103-0033, and 10-32X3/8 nut P/N 102-0008. (See
Purpose
at left for
part
numbers)
Output Sense Cable 2 Connects Output sense terminal to Common sense terminal of next unit. 118-1271
Instruction Manual 1 Lists material supplied and specifications for multiple unit combination. 228-1525
TABLE 3. MODEL PARAMETERS FOR THREE (3) IDENTICAL BOP 1000 WATT UNITS (SERIES)
(3) Identical Models
(Series)
d-c Output Range Closed Loop Gain
E
O Max
I
O Max
Voltage Channel
(V/V)
Current Channel
(A/V)
BOP 6-125MG ±18V d-c ±125A d-c 1.8 12.5
BOP 10-75MG ±30V d-c ±75A d-c 3.0 7.5
BOP 20-50MG ±60V d-c ±50A d-c 6.0 5.0
BOP 25-40MG ±75V d-c ±40A d-c 7.5 4.0
BOP 36-28MG ±108V d-c ±28A d-c 10.8 2.8
BOP 50-20MG ±150V d-c ±20A d-c 15.0 2.0
BOP 72-14MG ±216V d-c ±14A d-c 21.6 1.4
BOP 100-10MG ±300V d-c ±10A d-c 30.0 1.0
TABLE 4. GENERAL SPECIFICATIONS FOR THREE (3) IDENTICAL BOP 1000 WATT UNITS (SERIES)
SPECIFICATION RATING/DESCRIPTION CONDITION
INPUT CHARACTERISTICS
Current 176 Va-c 28.5A a-c maximum
264 Va-c 19.2A a-c maximum
Leakage current 10.5mA a-c 230V a-c, 47-63 Hz
OUTPUT CHARACTERISTICS
Programming
resolution / accuracy Voltage 14 bits / 0.2% 2% accuracy for Ext Ref Level. Unit gain adjustable between 0 and
E
ONOM
/10 (voltage) or I
ONOM
/10 (current).
Current 14 bits / 0.5%
Voltage Limit 12 bits / 0.5%
Current Limit 12 bits / 0.5%
Readback
resolution / accuracy Voltage 16 bits / 0.2% main or limit channel
Current 16 bits / 0.5% main or limit channel