KEPCO KIT 219-0444, Kit for connecting three 1000W BOPs in Series User Manual

Cable, Kepco

228-1525 REV 3

033012

I N S T R U C T I O N S H E E T

KEPCO

KEPCO, INC. 131-38 SANFORD AVENUE FLUSHING, NY. 11355 U.S.A. TEL (718) 461-7000 FAX (718) 767-1102

http://www.kepcopower.com email: [email protected]

An ISO 9001 Company.

CABLE

219-0444

KIT

CABLE KIT NO. 219-0444

BOP 1000W MODELS (3) IN SERIES

DESCRIPTION.

This kit contains the cables and terminations required to operate three identical 1000 Watt BOP High Power mod-

els in series, effectively multiplying the output voltage capacity by three. Only identical models may be configured

to operate in series.

This kit can be used with all 1000W BOP models that have revision levels as shown in Table 1. Earlier models

that have been upgraded to permit multiple unit configurations must include the letter “A” following the revision

number. CAUTION: Failure to install the ground cables supplied can result in damage to the power supply.

Refer to the associated technical manual supplied with the High Power BOP power supply for all instructions

regarding installation and operation of multiple units in series.

II.

SPECIFICATIONS

Table 3 lists the model parameters unique to a series combination of three identical 1000W BOP Power Supplies.

Table 4 lists the general specifications for the series combinations listed in Table 3. For specifications not listed in

Table 3, refer to the General Specifications provided in the associated technical manual supplied with each

1000W BOP power supply

TABLE 1. REVISION LEVELS APPLICABLE TO THIS KIT

Model

Revision

Revisions for Upgraded Units

(Must include “A”)

BOP 6-125MG

All

BOP 10-75MG

5 or higher

3A or 4A

BOP 20-50MG

8 or higher

5A, 6A or 7A

BOP 25-40MG

All

BOP 36-28MG

11 or higher

8A, 9A or 10A

BOP 50-20MG

7 or higher

5A or 6A

BOP 72-14MG

7 or higher

BOP 100-10MG

6 or higher

2A or 4A