KEPCO DIN KIT ECM (S) - Manual

©1998, KEPCO, INC 1
Data subject to change without notice 228-1334 REV 1
I N S T R U C T I O N M A N U A L
KIT
KEPCO
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
http://www.kepcopower.com " email: [email protected]
An ISO 9001 Company.
DIN ECM
-S
DIN-RAIL MOUNTING KIT
FOR SERIES ECM 16W
FIGURE 1. S SUFFIX ORIENTATION
INSTALLATION
1. INSTALL MOUNTING PLATE. Attach the mounting plate to the power supply using the hardware supplied
(see Figure 2). Install plate so that hole closest to edge is furthest from power supply terminals; and access
holes are not obstructed by power supply.
FIGURE 2. INSTALLING MOUNTING PLATE ON POWER SUPPLY
TABLE 1. COMPONENTS SUPPLIED
KIT
MODEL NO.
CLIP
(QTY 2)
PART NO.
MOUNTING PLATE
(QTY 1)
PART NO.
SCREW
(QTY 2)
PART NO.
WASHER (QTY
2)
PART NO.
DIN ECM-16S 108-0365 189-0692
101-0092
(4-40 X 0.312
BHPH)
103-0014
(NO. 4, INT.
TOOTH)
DESCRIPTION. Kepco KIT, Model DIN ECM-S contains
a cover, a mounting plate with left and right mounting
clips, and associated hardware (see Table 1) used to
install ECM Series 16W power supplies on a DIN rail.
The “S” suffix is for mounting along the short dimension
(width) as shown in Figure 1. Outline dimensions are
shown in Figure 5.