HT instruments HT5000 - Manual (Page 5)

HT-5000
EN - 4
4 OPERATING INSTRUCTIONS
4.1 INSTRUMENT DESCRIPTION
4.1.1 Description of the receiver RX5000
Fig. 1: Description of the receiver RX5000
Item Description
1 Control panel with display (see paragraph 4.1.2)
2
Speaker with volume control
The speaker plays back various acoustic signals (e.g. beeps
with modulating pitch relative to the signal strength)
Quieter Louder
When the receiver is switched on, the volume is set at a
standard level. The receiver will only start with the volume
at a different level if the volume has been manually
increased before switching off the receiver
3
Headphone jack
To connect headphones with a 3.5 mm plug connector
4 Battery compartment
5
Floor cap
This replaceable floor cap serves to protect the housing