HT instruments HT5000 - Manual (Page 30)

HT-5000
EN - 29
6.2 TECHNICAL CHARACTERISTICS OF TRANSMITTER TX5000
Parameter Value
Transmitted power
(switchable) 0.1W / 0.5W
Frequency 32.768kHz
Power supply
6x1.5V batteries type IEC LR20
Battery life
40 hours (for intermittent use with alkaline
batteries, 20 °C)
Working temperature
• Operation
• Storage
according to IEC/EN60068-1
-20
÷ 55°C (-4 ÷ 131°F)
-30 ÷ 70°C (-22 ÷ 158°F)
Category of measure
CAT II / CAT III 440V, CAT IV 300V
Size (LxWxH)
260 x 255 x 140mm (10.2 x 10 x 5.5)”
Weight (included batteries) 1.7kg (3lb)
Mechanical protection
Dust and water protected
according to a IEC/EN60529
IP56
6.3 GENERAL SPECIFICATIONS
Parameter Value
Sinusoidal vibrations
Peak acceleration
Frequency
According to IEC / EN 60068–2–6
20m/s 2
10Hz ÷150Hz
Free fall
Max. height (packaged)
According to IEC/EN60068-2-32
80cm (weight up to10kg)
Safety
IEC/EN61010-1
Protection class
III (according to IEC/EN61140)
Insulation
Double insulation
Relative humidity
max 93% at 30°C
6.4 ACCESSORIES
6.4.1 Standard
accessories
• Transmitter TX5000 • 6x1.5V batteries IEC LR20
• Receiver RX5000 • 10x1.5V batteries IEC LR06
• 2 cables R/B banana + alligator clip, 2m • Carrying bag
• 1 cable black banana + alligator clip, 10m • User manual
• 1 earth metal probe
6.4.2 Optional accessories
• Flexi sonde set for locating non-metallic pipes – Cod GOK50-R
• Transmitter clamp, 100mm diameter for the inductive coupling – Cod. 820005314
• Set of cables (Shuko plug + cable with RJ11 + coax cable) – Cod. 890008852