Detcon FP-624D - Manual (Page 45)

Model FP-624D
FP-624D Instruction Manual Rev. 1.2 Page 41 of 42
9.2 Spare Parts, Sensor Accessories, Calibration Equipment
Part Number Spare Parts
926-5255D0-100 FP-624D Plug-in Transmitter Module
370-201600-000 Replacement Plug-in Sensor
(Uses p/n 365-037020-160 in shipping container)
600-02056-0 FP-P Plug-in Hsg Threaded Insert 316SS
612-820000-000 Replacement LEL sensor housing (includes threaded insert)
500-001794-004 Standard Connector PCB
960-202200-000 Condensation prevention packet (for J-Box replace annually)
Sensor Accessories
897-850800-010 NEMA 7 Aluminum Enclosure less cover – 3 port
897-850400-010 NEMA 7 Aluminum Enclosure Cover (Blank)
897-850801-316 NEMA 7 316SS Enclosure less cover – 3 port
897-850401-316 NEMA 7 316SS Enclosure Cover (Blank)
613-120000-000 Sensor Splashguard with integral Cal-Port
943-002273-000 Harsh Location Dust guard
327-000000-000 Programming Magnet
960-202200-000 Condensation prevention packet (for J-Box replace annually)
Calibration Accessories
943-000006-132 Threaded Calibration Adapter
943-020000-000 Span Gas Kit: Includes calibration adapter, In-Line Humidifying Tube,
200cc/min fixed flow regulator, and carrying case.
(Does Not include gas).
942-520124-050 Span Gas cylinder: 50% LEL Methane balance air
Contains 104 liters of gas and is good for 175 calibrations
943-090005-502 200cc/min Fixed Flow Regulator for span gas bottle
Recommend Spare Parts for 2 Years
926-5255D0-100 FP-624D Plug-in Transmitter Module
370-201600-000 Replacement Plug-in Sensor
(Uses p/n 365-037020-160 in shipping container)
600-02056-0 FP-P Plug-in Hsg Threaded Insert 316SS
612-820000-000 Replacement LEL sensor housing (includes threaded insert)
500-001794-004 Standard Connector PCB
960-202200-000 Condensation prevention packet (for J-Box replace annually)