Catskill Craftsmen 51538 - Manual (Page 4)

STEP 1
A. Tap/insert ONE 1 1/2” pin into
each end of all the doors. DON’T
OVERDRIVE PINS! Pins should stick
up about 1/2” when seated.
B. Attach the magnet plate (may be
stuck to magnet!) with the 1/2” #4
screw to the top of the doors. Bumps
go toward the wood.
C. Attach door handles with 7/8”
truss head machine screws.
STEP 2
A. Take the 2 front braces and tap/
insert one 3/4” steel pin into each end
of both braces until seated. About 3/8”
will stick out when seated. OK if loose.
STEP 3
Assemble Spice Rack
Insert retainer
rods into holes
Fasten Shelves with
1 1/4” Phillips Flat Head
#8 Screw (Bronze)
Pilot holes in shelves
go toward back