Catskill Craftsmen 51538 - Manual (Page 12)

Note: Middle Shelf
has edge banding out
STEP 13
A. Set the height for the
middle shelf by choosing one
of two sets of holes in the
Back & Side Panels. Then tap
1” pins into the 6 holes in the
Back & Side Panels.
B. Fit the middle shelf into the
cart and rest it on the pins.
STEP 14
A. Assemble top by placing the top and the drop leaf upside down on a smooth flat surface. Install
hinges using 5/8 #8 screws. The longer part of the hinge goes on the drop leaf with the short part on
the cart top. Fasten the drop leaf supports using 5/8 #8 screws. See illustration 14B.
B. Make a large X mark over each of the 4 pilot holes in the bottom. Make marks about 1/2-1” long.
These marks will help you align the cabinet with the pilot holes in the bottom of the Top.
C. Place the Cart Top on the cabinet. Open the outside doors. Maneuver the Cart Top so that the X
marks/pilot holes in the bottom of the Top align with the holes in the “L” brackets. Secure top to “L”
brackets with 5/8” #7 screws.
ILLUSTRATION 14A
ILLUSTRATION 14B