Axxess Interface ASWC - Manual (Page 4)

4
Introduction to the ASWC Interface
and Wiring Harness
On the top of the ASWC interface there are three points of interest:
1) The programming LED – flashes rapidly when in auto detect mode,
flashes slowly in manual programming mode.
2) The reset button – Hold down button for 3 seconds to start auto
detect mode; hold down longer then 10 seconds to start manual
programming mode.
3) The slide cover (USB Port Cover) – Open this up to reveal the
USB update port. Using the USB-CAB update cable and the Axxess
website you can make sure you always have the latest updated
inventory.
Overview
USB Port Cover Reset Button Programming LED