Axxess Interface ASWC - Manual (Page 14)

14
5) Here is the chart to show how many presses of the “Volume Up”
button is needed for which radio you are trying to program:
6) Once the radio manufacturer has been selected hold “Volume
Down” for at least 5 seconds. The LED will flash the number of times
which radio was selected then the LED will remain on to indicate the
ASWC has finished programming.
Manual Radio Type Programming
If only changing the radio type is needed then follow this procedure below.
1) Within the first 25 seconds of turning the key on, press and hold
the car’s “Volume Down” button.
2) After 15 seconds of holding “Volume Down”, the ASWC’s
red LED will go on.
3) Release the “Volume Down” and the LED will go “off”. We are now
in radio programming mode.
Section 3: Troubleshooting
1 Eclipse
2 Kenwood
3 Clarion “Type 1”
4 Sony and Dual
5 JVC
6 Pioneer and Jensen
7 Alpine*
8 Visteon
9 Valor
10 Clarion “Type 2”
11 METRA OE