Avigilon ACC Camera Installation Tool Version 4.12 - Manual (Page 10)

Avigilon Camera Installation Tool User Guide
6
Figure A.
Image and Display dialog box
2. In the Image and Display dialog box, use the Zoom controls to adjust the camera's zoom position.
3. If the camera has a built-in auto focus feature, you can select the Continuous Focus option to
enable the camera to focus itself whenever the scene changes.
4. To manually focus the camera, select Open in the Iris drop down list then use the Focus buttons
to focus the camera.
The left arrow buttons focus the camera towards Zero, and the right arrow buttons focus the
camera towards Infinity. Click the Auto Focus button to enable the camera to automatically focus
once.
Note: Once the focus is manually set, it will not change.
5. Make the required changes to adjust the camera's image settings.
Tip: Use the Maximum Exposure, Maximum Gain and Priority options to control low
light behavior.
Option Description
Exposure
You can allow the camera to control the exposure by
selecting Automatic, or you can set a specific exposure rate.
Note: Increasing the manual exposure time may affect the