Avigilon Lenel (Previously GE) Facility Commander Wnx Integration - Manual (Page 13)

Avigilon Control Center 5 System Integration Guide with Lenel Facility Commander Wnx
10
Backing Up Mapped Alarms
After you finish mapping all the alarms in the Configuration Tool, you can choose to back
up a copy of the mappings.
If you are performing this procedure before upgrading the integration, be aware that in
older versions of the integration the backup file is located in the same folder but is labeled
GatewayParams.xml .
1. Navigate to C:\Program Files\Avigilon\Avigilon FCWnx Gateway\ .
NOTE: The filepath may be different depending on how your system is configured.
2. Copy and paste the AlarmConfig.xml file to a back up location.
Restoring Mapped alarms
When you have a backup copy of the mapped alarms, you can restore the mapped alarms
any time.
1. Locate your backup copy of the AlarmConfig.xml file.
If you are restoring a backup from a previous version of the integration, the
backup file would be named
GatewayParams.xml .
2. Copy and paste the backup file into the C:\Program
Files\Avigilon\Avigilon FCWnx Gateway\ folder.
If prompted, allow Windows to overwrite the copy that is currently in the folder.
3. Open the integration Configuration Tool. The restored mappings should be
displayed in the Alarm Mappings list.
4. Click Update Service to restart the Gateway Windows service and apply the
alarm mapping changes.