Erasing the storage configuration, Configuring the server backup settings – Avigilon ACC Server Version 5.2 User Manual

Page 31

Setup

Figure B.

Add Data Volume dialog box

3. To delete a Secondary Data Volume, select the drive and click

Delete Data Volume

. Deleting a

data volume will erase all recorded data from that drive.

Note:

You cannot delete a Primary Data Volume, you can only erase all data. See

for more information.

4. If you are not satisfied with the location of the Primary Data Volume, select the drive you prefer

and click

Set Primary Data Volume

The Primary Data Volume contains the database that indexes the surveillance data.

Note:

The drive must have a data volume before it can be set as the Primary Data

Volume.

5. When you are satisfied with the storage configuration, click

Erasing the Storage Configuration

Note:

If you choose to erase all stored data, be aware that all recorded surveillance data and server

settings will be lost.

1. Open the Storage dialog box. For more information, see

2. Click

Erase All Data

3. When the confirmation dialog box appears, click

Yes

4. You will need to create a new storage configuration before you can start up the Control Center

Server again. See

for more information.

Configuring the Server Backup Settings

To allow the system to automatically backup recorded video, you must enable it in the Admin Tool and
assign a backup location for the backup files.