Avigilon ACC Server Version 5.2 - Manual (Page 30)

Avigilon Control Center Server User Guide
 If you recently chose to Erase All Data , you must reset the Storage configuration before you may
continue.
Complete the following procedure in the Storage dialog box:
If the Storage dialog box is not already open, see Accessing the Server Storage Configuration for more
information.
1. In the Storage dialog box, select the drive for storing the Config Volume and click Set Config
Volume .
Figure A.
Storage dialog box
Note: Some of the buttons in the figure may not be available if the drive cannot
accommodate the setting.
2. To add a data volume, select the drive and click Add Data Volume . The button is not available if
the drive already has a data volume.
o In the Add Data Volume dialog box, enter the preferred data volume size then click OK .
26