Aposonic A-S0804R3 - Manual (Page 36)

36
Press ◄ or ►/ mouse wheel to change values.
ID NUMBER is required to make difference of each DVR.
E. DISPLAY SETUP
Press SET to ENABLE or DISABLE display of CAMERA TITLE / DVR STATUS /
DATE / TIME.
F. LANGUAGE
Press ◄ or ► to change on-screen-display (OSD) language.
G. SYSTEM PASSWORD
Press ▲ or ▼ to select items and ◄ or ► to change values.
Default password: 1111.
H. FIRMWARE UPDATE
Press YES to start firmware update. After updated, the DVR will reboot automatically.
At this moment, please do not turn off the DVR manually.
NOTE: 1. Please format USB flash memory with FAT32.
2. For function stability, we suggest user to STOP recording function
before processing firmware update function.
I. LOAD DEFAULT
Press SET button to entry CONFIGURE SET screen. There are LOAD SETUP FROM
DEFAULT, LOAD SETUP FROM USB and BACKUP SETUP TO USB three parts.
I-1. LOAD SETUP FROM DEFAULT: Press SET button to load the setting back to
factory default.
I-2. LOAD SETUP FROM USB: Press SET button to load the pen drive setting to
the current DVR.
I-3. BACKUP SETUP TO USB: Press SET button to backup the current DVR setting
into pen drive.
J. DAYLIGHT SAVING TIME SETUP
Press ◄ or ►/ mouse wheel to change the DAYLIGHT MODE option: Disable,
Manual and Auto.