Aposonic A-S0804R3 - Manual (Page 28)

28
D. ALARM RECORD DURATION
Press ◄ or ► to set dwell time of alarm recording.
E. RECORD QUALITY
Press SET to switch image quality of each channel (720 × 240 ( NTSC ) / 720 × 288
( PAL )) or each two channels (360 × 240 ( NTSC ) / 360 × 288 ( PAL )). User can use
mouse wheel to change the image quality of each single channel: LOW/ MEDIUM/
HIGH/ BEST, or use “AVERAGE” to switch the image quality of all channels at once.
Record Resolution: 720 × 240 ( NTSC ) / 720 × 288 ( PAL )
Record Resolution: 360 × 240 ( NTSC ) / 360 × 288 ( PAL )
F. RECORD MODE
Press ◄ or ► to switch record mode to ALWAYS/ MOTION/ SCHEDULE / OFF.
G. AUDIO RECORD
Press ◄ or ► to switch AUDIO RECORD ON or OFF.
H. SCHEDULE SETUP
Press SET to get into schedule setup menu。
1. Use mouse to select schedule day/ time/ mode.
2. Click to save change and exit.