Additel PCal User Manual - Manual (Page 4)

- 3 -
Installation
System Requirements
Hardware Requirements
Computer: CPU-Intel Pentium II (or better)
Memory: 1GB (minimum)
Hard Disk free space: 60GB (minimum)
Hardware must have serial port
A Pressure Comparator: Additel pressure pump series are recommended
Reference: A Digital Pressure Gauge (ADT681), or A Digital Pressure Calibrator
(ADT672) are recommended
Software Requirements
Operating System:
Windows XP/Windows 2003/Windows Vista/Windows7/Windows8
Installation of PCal
Make sure you have an installation CD, if not, please contact Additel.
First, Insert the CD into the drive on your computer and the setup will run
automatically. If the setup fails to start, please run the Setup.exe from the CD.
Second, Installation will detect whether the following items have been installed
in system or not. If not, they will be installed automatically, if so, this step will be
skipped.
 Windows Installer 3.1
 Windows Imaging Component
 Microsoft .NET Framework 4
Third, the setup Wizard will be displayed as shown in below picture. Follow the
instructions in the setup to complete the installation.