Additel PCal User Manual - Manual (Page 35)

- 34 -
#Reference{0}CalibrationDate# Reference{0} Calibration Date
#Reference{0}Due# Reference{0} Due Date
#Reference{0}Status# Reference{0} Status
#Reference{0}Mfr# Reference{0} Manufacturer
UUT Manufacturer
# UUT_Manufacturer# UUT Manufacturer Name
# UUT_Manufacturer_Address# UUT Manufacturer Address
# UUT_Manufacturer_Website# UUT Manufacturer Website
# UUT_Manufacturer_Telephone# UUT Manufacturer Telephone
# UUT_Manufacturer_Fax# UUT Manufacturer Fax
# UUT_Manufacturer_ContactPerson# UUT Manufacturer Linkman
# UUT_Manufacturer_Remark#
UUT Manufacturer Remark
UUT Customer
#UUT_Customer# UUT Customer Name
# UUT_Customer_Address# UUT Customer Address
# UUT_Customer_Email# UUT Customer Email
# UUT_Customer_Teplephone# UUT Customer Telephone
# UUT_Customer_Fax# UUT Customer Fax
# UUT_Customer_ContactPerson# UUT Customer Linkman
# UUT_Customer_Remark# UUT Customer Remark
UUT Application Site
# UUT_Location# UUT Application Site Name
# UUT_Location_Address# UUT Application Site Address
# UUT_Location_Email# UUT Application Site Email
# UUT_Location_Telephone# UUT Application Site Telephone
# UUT_Location_Fax# UUT Application Site Fax
# UUT_Location_ContactPerson# UUT Application Site Contact Person
# UUT_Location_Remark# UUT Application Site Remark
Frequently Asked Questions
Be sure that the serial cable connectors are properly seated and that the
reference has been turned on. If the software still does not detect the reference,
check the number of the serial port on the computer. And please make sure that the
Baud Rate in the System Settings is consistent with the reference.