Wellsaw 5М - Manual (Page 13)

13
Replacement Parts - Blade Tensioning Device
101162 Take Up Support
100004-15 Cap Screw
1000410-1 Bearing
101167 Take Up Screw Assembly
101402 Tension Gauge Nut Assembly
S20 Tension Spring
101171 Slide Block
Replacement Parts for Later Model No. 5
Wells Metal Cutting Bandsaws
A12 Wheel Slide Block used on saws up to and
including Serial No. 5M-6841. Later model saws
order No. 101171.
A103 Blade Brush Angle (inside frame) used on saws
prior to Serial No. 2975. Later model saws use
M425 Blade Brush Angle.
A104 Blade Brush (inside frame) used on saws prior
to Serial No. 2975. Later model saws use
M-426 Blade Brush.
A113 Motor Pivot Post for 3 speed saw. Order 101157
Motor Pivot Post for 4 speed saw.
A160 Belt Guard for 3 speed saw. Order 101182 Belt
Guard for 4 speed saw.
A2330 V Belt used on 3 and 4 speed saws order No.
100066-5.
M60 Vise Screw with M177 Collar Assembled Unit
replaced with M307 for all model saws.
M68 Drive Pinion used on saws up to and
including Serial No. 5M-7302 Order a 101643
Drive Pinion Shaft Assembly
(includes drive pinion, drive pinion shaft and
roll pin). Later model saws use 101645 Drive
Pinion drilled for roll pin.
M95 Driven Pulley used on 3 speed saws. For 4
speed saws order 101156 Driven Pulley.
M110 Plastic Gear with M165 Hub replaced with
M327 for all model saws.
M111 Pulley Shaft and Pinion (.625 dia.) replaced
with one M171 Pulley Shaft & Pinion and one
3202 Ball Bearing for 3 speed saw. Order
101187 Pulley Shaft & Pinion for 4 speed saw.
M112 Drive Pinion Shaft used on saws up to
and including Serial No. 5M-7302. Order a
101643 Drive Pinion Shaft Assembly (includes
drive pinion, drive pinion shaft and roll pin).
Later model saws use 101644 Drive Pinion
Shaft.
M189 Driven Pulley Key for 3 speed saw. Order No.
100056-15 for 4 speed saw.