USGlobalsat BT-335 User Manual - Manual (Page 9)

BT-335 page 9
y Step 2: Check the COM port which is used by the Bluetooth, and set the COM port here.
y Step 3: Select the saving interval. There are 3 options you can choose, including “Walk/Jog”,
“Bicycle”, and “Vehicle”.
y Step 4: Select the Metric or Imperial unit.
y Step 5: Select the directory for exporting files.
y When you finished the setup, a successful message appears and all settings are saved in system.
3. The BT-335 utility will import the setting you just
made from Configuration Wizard. If you
did not use Configuration Wizard to do
the settings, please manually select the correct
COM port and set the Baud Rate to “38400”. If
later on you want to enable Configuration Wizard
again, please click from menu bar, [File] > [Quick
Configuration].