USGlobalsat BT-335 User Manual - Manual (Page 10)

BT-335 page 10
4. From menu bar, click on [Settings] > [Configuration] to open the Device Configuration dialog
box.
f Data logging format:
There are three options for you to choose those data items to be recorded.
f Enable WAAS/EGNOS/MSAS:
Enable the WAAS/EGNOS/MSAS feature to acquire more precise position.
f Disable data logging if speed falls below a threshold:
If your speed is below this specified value, BT-335 will not save the data of current position.
f Disable data logging if distance is less than the selected radius:
If the distance between your last point and current point is less than this specified value, BT-335 will
not save the data of current position.
f Data logging interval Mode
User defined interval (time or distance) for recording the data. If you click the “Set the default logging
interval” button, it will be set to By time 30 seconds.
f System information
It shows the current memory usage status.
f Operation Mode
You can set whether you want to enable the GPS feature, Data logger feature or both.
5. When you have done the configuration setup, press OK button to save the settings to BT-335.
6. These settings will take effect when next time you restart the device.